Equipment Safety Verification
Technical checks help verify whether equipment can continue operating safely under normal working conditions.
READY TO START?
Need a Reliable
Inspection Partner?
From one-time inspections to ongoing technical support, Machex helps you move forward with confidence, safety and compliance.
Fast response
Global coordination
Qualified inspectors
PERIODIC CONTROL
Independent Equipment Safety Inspection
Periodic inspections performed according to applicable technical requirements.
PERIODIC INSPECTION SERVICES
Reliable Periodic Inspections for Safe and Compliant Equipment
Machex provides independent periodic inspection services for industrial equipment, lifting systems, pressure equipment, electrical installations and workplace machinery.
Our inspections help identify safety risks, verify equipment condition and support compliance with applicable regulations, standards and manufacturer requirements.
PLANNED SAFETY CONTROL
Periodic inspections help detect deterioration, operational defects and safety risks before they lead to equipment failure, workplace incidents or unplanned downtime.
Planned Inspection Intervals
Inspections can be organized according to regulatory periods, equipment type, risk level and operating conditions.
Regulatory Compliance Support
Inspection activities are aligned with applicable legislation, technical standards and manufacturer instructions.
Condition and Function Checks
Components, safety systems, controls and operating functions are evaluated for defects and deterioration.
Early Risk Identification
Potential hazards, unsafe conditions and developing defects are identified before they become critical.
Documented Inspection Results
Findings, measurements, observations and recommendations are presented in a structured inspection report.
OUR INSPECTION CAPABILITIES
Periodic Inspection Services for Industrial Equipment and Installations
Our periodic inspection capabilities cover critical equipment, technical installations and workplace systems that require scheduled safety and condition assessments.
Each inspection is planned according to the equipment type, operating environment, applicable requirements and identified risk level.
LIFTING SYSTEMS
Lifting Equipment Inspection
Periodic inspection of equipment used to lift, lower, suspend or move loads and personnel.
Typical inspection scope
- Cranes, hoists and lifting platforms
- Forklifts and material-handling equipment
- Safety devices, ropes, chains and hooks
View inspection scope
PRESSURE SYSTEMS
Pressure Equipment Inspection
Condition and safety inspection of equipment and installations operating under internal pressure.
Typical inspection scope
- Pressure vessels and air tanks
- Boilers and thermal equipment
- Safety valves, gauges and pressure controls
View inspection scope
ELECTRICAL SAFETY
Electrical Installation Inspection
Technical verification of electrical installations, protective systems and workplace electrical safety.
Typical inspection scope
- Earthing and bonding systems
- Electrical panels and distribution systems
- Lightning protection and residual-current protection
View inspection scope
WORK EQUIPMENT
Machinery and Work Equipment Inspection
Periodic evaluation of machinery condition, operational safety and protective measures.
Typical inspection scope
- Machine guards and interlocks
- Emergency stops and control systems
- Mechanical condition and operational function
View inspection scope
FIRE PROTECTION
Fire Safety Systems Inspection
Inspection of fire detection, suppression and emergency protection systems within industrial facilities.
Typical inspection scope
- Fire pumps and hydrant systems
- Suppression and alarm systems
- Emergency equipment and accessibility
View inspection scope
TECHNICAL INSTALLATIONS
Ventilation and Industrial Installation Inspection
Periodic assessment of ventilation, extraction and process-supporting technical installations.
Typical inspection scope
- Ventilation and extraction systems
- Ducts, fans and air-handling equipment
- Operational performance and safety condition
View inspection scope
STORAGE SYSTEMS
Storage and Racking System Inspection
Structural and operational inspection of industrial storage and warehouse racking systems.
Typical inspection scope
- Uprights, beams and bracing
- Impact damage and deformation
- Anchoring, load signs and protective barriers
View inspection scope
PROTECTIVE SYSTEMS
Safety Device and Protective System Inspection
Verification of safety devices and protective systems intended to prevent hazardous operation.
Typical inspection scope
- Limit switches and safety interlocks
- Emergency shutdown systems
- Physical guards and protective barriers
View inspection scope
CUSTOM INSPECTION
Special Equipment and Project-Based Inspection
Customized periodic inspection programs for non-standard equipment, complex systems and project-specific requirements.
Typical inspection scope
- Custom-built industrial equipment
- Integrated technical systems
- Client, project or manufacturer requirements
Discuss your inspection needs
INDEPENDENT PERIODIC CONTROL
A Coordinated Inspection Program for Safer Industrial Operations
Machex can coordinate periodic inspection activities across multiple equipment groups, facilities and operating locations. Inspection findings are documented clearly to support maintenance planning, corrective actions and compliance management.
INSPECTION PROCESS
A Structured Process for Periodic Inspection and Compliance Control
Each periodic inspection is performed through a defined technical process that combines equipment review, on-site examination, measurements, testing and compliance evaluation.
This structured approach helps identify unsafe conditions, technical deficiencies and maintenance requirements before they develop into operational risks.
PERIODIC INSPECTION WORKFLOW
01
STEP ONE
Inspection Planning
The equipment list, inspection frequency, operating environment and required control scope are reviewed before the inspection begins.
Equipment identification, scope definition and scheduling
02
STEP TWO
Document and Equipment Review
Available technical records, previous reports, maintenance history and equipment identification details are examined.
Technical files, previous findings and maintenance records
03
STEP THREE
Visual and Functional Inspection
The equipment is examined for visible damage, deterioration, improper installation, unsafe conditions and functional deficiencies.
Structural condition, safety devices and operational function
04
STEP FOUR
Measurements and Technical Tests
Required measurements, functional tests and equipment-specific technical checks are performed using suitable inspection instruments.
Measurements, load tests and functional verification where applicable
05
STEP FIVE
Compliance Evaluation
The inspection results are compared with applicable requirements, technical criteria, manufacturer instructions and safe-use conditions.
Technical acceptance criteria and compliance classification
06
STEP SIX
Findings and Corrective Actions
Identified deficiencies are classified and documented with practical recommendations for repair, maintenance or further evaluation.
Clear findings, priorities and corrective-action guidance
CONTROLLED PROCESS
Inspection, testing and technical verification
Technical inspections are planned according to equipment type, operating conditions and applicable requirements.
COMPLIANCE CONTROL
Inspection Criteria Based on Technical and Operational Requirements
Inspection results are evaluated against the requirements applicable to the equipment, installation, operating environment and intended use.
TECHNICAL BASIS
Applicable Standards
Relevant technical standards and recognized inspection practices are used as an evaluation basis where applicable.
CONTROL CRITERIA
Regulatory and Technical Requirements
Local requirements, equipment-specific control criteria and workplace safety obligations are considered.
EQUIPMENT DATA
Manufacturer Instructions
Manufacturer manuals, rated capacities, maintenance instructions and safe operating limits are reviewed.
REPORTS & DELIVERABLES
Clear Findings, Technical Evaluation and Actionable Deliverables
Following each periodic inspection, Machex provides structured documentation that clearly presents the condition of the equipment, identified deficiencies and the technical actions required.
Reports are prepared to support safe operation, maintenance planning, internal records and compliance follow-up.
TECHNICAL DOCUMENTATION
Clear records for compliance and maintenance follow-up
Inspection documentation is prepared according to the equipment category, inspection scope and observed conditions.
WHAT YOU RECEIVE
01
TECHNICAL RECORD
Inspection Report
A structured report presenting the inspected equipment, applied controls, observations, measurements and technical evaluation results.
Equipment details, inspection scope and recorded results
02
STATUS EVALUATION
Compliance Assessment
The equipment condition is evaluated against applicable technical criteria, operational requirements and safe-use conditions.
Clear compliance status and technical classification
03
IDENTIFIED CONDITIONS
Identified Deficiencies
Observed defects, unsafe conditions, functional problems and technical non-conformities are clearly documented.
Location, type and significance of each identified issue
04
ACTION GUIDANCE
Corrective Action Recommendations
Practical recommendations are provided for repair, adjustment, replacement, maintenance or additional technical evaluation.
Prioritized technical actions and follow-up requirements
05
VISUAL EVIDENCE
Inspection Images and Evidence
Relevant inspection photographs and technical evidence may be included to support findings and improve traceability.
Visual records linked to equipment condition and findings
06
FOLLOW-UP SUPPORT
Maintenance and Follow-up Recommendations
Where required, the report includes maintenance priorities, monitoring recommendations and suggested follow-up inspection actions.
Maintenance planning and future control guidance
DIGITAL REPORT DELIVERY
Professional Inspection Documentation Ready for Operational Use
Final inspection documentation can be delivered digitally in PDF format, providing a clear record for equipment files, internal controls, maintenance planning and follow-up activities.
Digital PDF documentation
Structured findings and classifications
Technical recommendations for follow-up
READY TO START?
Need a Reliable
Inspection Partner?
From one-time inspections to ongoing technical support, Machex helps you move forward with confidence, safety and compliance.
Fast response
Global coordination
Qualified inspectors